FVC240 Vortex Flowmeter

  • Availability: In Stock

FVC240 vortex flowmeter can realize the following functions according to different selections: measuring the temperature, pressure, instantaneous flow rate, cumulative flow rate and other parameters of industrial pipeline medium fluid, and has pulse output, (4~20)mA analog signal output, RS485 communication ( ModbusRTU protocol), Internet of Things GPRS and other functions. It is widely used in the measurement and control of superheated steam, saturated steam, compressed air and general gases, water and liquids in industrial sites such as heating, gas supply, chemical industry, environmental protection, metallurgy, and textiles.

Features:

  • No moving parts resulting in high reliability and long-term stability
  • Low pressure loss (approx. 0.25 ~ 0.5 of an orifiice flowmeter)
  • No compensation is required when measuring the volume flow rate of the fluid.
  • No calibration needed upon switching. 

Specification

Model FVC240 Flowmeter
Medium Solid, liquids, gas
Diameter DN10~DN500
Accuracy 1.5%, 1.0%
Medium Temperature -20°C ~ +150°C, -20°C ~ +260°C, -20°C ~ +320°C, -20°C ~ +420°C
Frequency RS485 communication (Modbus RTU)
Range Ratio 8:1
Power Supply 24VDC±5%  Li battery(3.6VDC)
Signal Output 4~20mA,   RS485 communication (Modbus RTU)
Ingress Protection IP65
Body Materials Stainless shell
Relay 1~2 relay optional